5 INSTALLATION OF PAPER

Moisture, fingerprints or dust on the paper surface may cause a noise at printing or deterioration in print quality. Set the paper in the following procedure to prevent adhesion of fingerprint or dust on the paper surface.

1Open the door.

• Switch the lever located on the left side to the “OPEN” position.

The door opens.

2Load the paper roll.

•Place the paper roll in the printer.

printing side

INCORRECT CORRECT

Note: The printing surface is the outside. Place the paper with the thermo- sensitive side (printing side) up. When the paper roll is placed inversely, images can not be printed.

3Pull out the paper end.

•Pull out the first 15-

20cm (6 in. - 9 in.) of the paper to remove any slack in the roll.

4Close the door.5Cut the paper end.

cutter

•Cut the paper end with the cutter just like tearing off the paper.

8