When setting the paper, observe the following precautions to prevent paper jam.

Do not use defective paper.

Do not use the bent or wrinkled paper.

Adjust the paper position correctly.

When the paper is fed out skewed from the print exit, adjust the paper position so that it is fed out straight.

Do not slack the roll paper.

Set the paper tightly to remove any slack.

If the side of the print paper is uneven or the core is sticking out, the amount of paper feeding after printing may vary.

When the side of paper is uneven or the core is sticking out, install the print paper after making the paper side even.

The core is sticking out.

The paper is uneven.

Make the paper side even.

INCORRECTCORRECT

CAUTION

•Keep the high-density paper away from fingerprint, dust or moisture when storing it.

•Do not touch the rubber roller. Do not stain or damage the roller surface.

•Do not touch the thermal head (located behind the cutter). When printing, the thermal head is heated to high temperature.

•Do not touch the cutter blade.

9