10 ERROR DISPLAY

When an error in operation occurs, an audible alarm and a visible error is displayed in the LED indicator.

Cause/Error display

Symptom/Remedy
1 No paper

[Symptom]

 

 

 

• When the paper runs out or the paper is not installed, printing

 

 

 

becomes impossible and alarm tone is given.

 

 

 

In this case, all the functions of buttons and switches become

 

 

 

invalid.

 

 

 

 

 

 

 

[Remedy]

 

 

 

Install brand-new paper according to "5. INSTALLATION OF

 

 

 

PAPER" on page 8.

 

 

 

 

 

 

 

 

Cause/Error display

Symptom/Remedy

2 Overheat

[Symptom]

 

 

 

• When the head gets overheated, " " is displayed on the

 

 

 

indicator and alarm tone is given.

 

 

 

In this case, all the functions of buttons and switches

 

 

 

 

 

 

become invalid.

 

 

 

 

 

 

 

 

 

 

 

[Remedy]

 

 

 

Wait until the head is cooled down.

 

 

 

 

Cause/Error display

Symptom/Remedy

3 Button input

[Symptom]

 

error

• An alarm tone is given once, " " is displayed for one second

 

 

 

in the indicator, and button operation is nullified in the following

 

 

 

cases:

 

 

 

 

 

 

• The COPY button is pressed first after the power is turned

 

 

 

on.

•The DOWN, UP, SET or GAMMA button is pressed when the MODE switch No. 1 is set to ON.

•Any button on the front panel is pressed when one of the other error messages is displayed on the LED.

16