Mitsubishi Electronics PKA-AFAL Simple Timer, Timer Off indication is no longer displayed

6. Timer

7.	Press the appropriate Set Temperature button 3 to set the desired	6.1.2. Simple Timer
	temperature (at ¶).	■ You can set the simple timer in any of three ways.
	* Each press changes the setting, in the following sequence: No	•	Start time only:
	display (no setting) ⇔ 75 ⇔ 77 ⇔ ... ⇔ 84 ⇔ 86 ⇔ 54 ⇔ ... ⇔ 73		The air conditioner starts when the set time has elapsed.
	⇔ No display.	•	Stop time only:
	(Available range: The range for the setting is 12 °C, 54 °F to 30 °C,		The air conditioner stops when the set time has elapsed.
	86 °F. The actual range over which the temperature can be con-	• Start & stop times:
	trolled, however, will vary according to the type of the connected		The air conditioner starts and stops at the respective elapsed times.
	unit.)	■ The simple timer (start and stop) can be set only once within a 72-hour
8.	After making the appropriate settings at Steps 5, 6 and 7, press the	period.
	Filter button 4 to lock in the values.	The time setting is made in hour increments.
	To clear the currently set values for the selected operation, press and	Note:
	quickly release the Check (Clear) button 0 once.	*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same time.
		*2. The simple timer will not operate when any of the following conditions is in
	* The displayed time setting will change to “—:—”, and the On/Off
			effect.
	and temperature settings will all disappear.
			The timer is off; the system is in malfunction state; a test run is in progress;
	(To clear all weekly timer settings at once, hold down the Check		the remote controller is undergoing self-check or remote controller check;
	(Clear) button 0 for two seconds or more. The display will begin		the user is in the process of selecting a function; the user is in the process
	flashing, indicating that all settings have been cleared.)		of setting the timer; the system is under central control. (Under these con-
			ditions, On/Off operation is prohibited.)

Note:

Your new entries will be cancelled if you press the Mode (Return) button

2 before pressing the Filter

button 4.

If you have set two or more different operations for exactly the same

time, only the operation with the highest Operation No. will be carried

out.

AFTER

ON

Hr

9. Repeat Steps 3 to 8 as necessary to fill as many of the available cells

SIMPLE

TEMP.

ON/OFF

1

as you wish.

10.Press the mode (Return) button 2 to return to the standard control

MENU

ON/OFF

w

screen and complete the setting procedure.

FILTER

4

BACK

MONITOR/SET

DAY

11.To activate the timer, press the Timer On/Off button 9, so that the

CHECK

TEST

0

PAR-21MAA

CLOCK

OPERATION

“Timer Off” indication disappears from the screen. Be sure that the

CLEAR

“Timer Off” indication is no longer displayed.

* If there are no timer settings, the “Timer Off” indication will flash on

the screen.

2

q

9

<How to View the Weekly Timer Settings>

<How to Set the Simple Timer>

•

ª

Timer Settings

™

¢ Timer Setting

SUN

TIMER

ON

£ Action (On or Off)

OFF

Hr

ON

AFTER

* “— —” is displayed if there is no

˚F

¡

WEEKLY

¡ setting.

SIMPLE

1. Be sure that the weekly timer indicator is visible on the screen (at ¡).

1. Be sure that you are at a standard control screen, and that the simple

2. Press the Timer Menu button w so that “Monitor” is indicated on the

timer indicator is visible in the display (at ¡).

screen (at •).

When something other than the Simple Timer is displayed, set it to

3.

Press the Timer On/Off (Set Day) button 9 as necessary to select

SIMPLE TIMER using the function selection of remote controller (see

the day you wish to view.

8.[4]–3 (3)) timer function setting.

4.

Press the

or

Operation button (7or 8) as necessary to change

2. Press the Timer Menu button w, so that the “Set Up” appears on the

the timer operation shown on the display (at ª).

screen (at ™). (Note that each press of the button toggles the display

* Each press will advance to the next timer operation, in order of

between “Set Up” and “Monitor”.)

time setting.

3. Press the ON/OFF button 1 to display the current ON or OFF simple

5. To close the monitor and return to the standard control screen, press

timer setting. Press the button once to display the time remaining to ON,

the Mode (Return) button 2.

and then again to display the time remaining to OFF. (The ON/OFF

indication appears at £).

<To Turn Off the Weekly Timer>

•

“ON” timer:

Press the Timer On/Off button 9 so that “Timer Off” appears at ¤.

The air conditioner will start operation when the specified number of

10

hours has elapsed.

TIME SUN

˚F

˚F

•

“OFF” timer:

WEEKLY

The air conditioner will stop operation when the specified number of

10

hours has elapsed.

<To Turn On the Weekly Timer>

4. With “ON” or “OFF” showing at £: Press the appropriate Set Time button

Press the Timer On/Off button 9 so that the “Timer Off” indication (at ¤)

10

q as necessary to set the hours to ON (if “ON” is displayed) or the hours

goes dark.

to OFF (if “OFF” is displayed) at ¢.

TIME

SUN

• Available Range: 1 to 72 hours

˚F

˚F

5. To set both the ON and OFF times, repeat Steps 3 and 4.

WEEKLY

* Note that ON and OFF times cannot be set to the same value.

10

6. To clear the current ON or OFF setting: Display the ON or OFF setting

(see step 3) and then press the Check (Clear) button 0 so that the time

setting clears to “—” at ¢. (If you want to use only an ON setting or only

an OFF setting, be sure that the setting you do not wish to use is shown

as “—”.)

9