Mitsubishi Electronics PKA-AFA Display Section, Operation Section, Wired Remote-Controller, Temp

2. Parts Names

■Wired Remote-Controller

Display Section

“Sensor” indication

For purposes of this explanation, all parts of the display are shown as lit. During actual operation, only the relevant items will be lit.

Identifies the current operation

Shows the operating mode, etc.

*Multilanguage display is sup- ported.

“CentrallyControlled”indicator

Indicates that operation of the re- mote controller has been prohib- ited by a master controller.

Day-of-Week

Shows the current day of the week.

Time/Timer Display

Shows the current time, unless the simple or Auto Off timer is set.

If the simple or Auto Off timer is set, shows the time remaining.

TIME SUN MON TUE WED THU FRI SAT
TIMER	Hr	ON
AFTER	AFTER	OFF
ERROR CODE		FUNCTION
˚F˚C		FILTER
˚F˚C
		WEEKLY
ONLY1Hr.		SIMPLE
		AUTO OFF

Displayed when the remote controller sensor is used.

“Locked” indicator

Indicates that remote controller but- tons have been locked.

“Clean The Filter” indicator

Comes on when it is time to clean the filter.

Timer indicators

The indicator comes on if the corre- sponding timer is set.

Fan Speed indicator

Shows the selected fan speed.

“Timer is Off” indicator

Indicates that the timer is off.

Temperature Setting

Shows the target temperature.

Up/Down Air Direction indica- tor

The indicator shows the direc- tion of the outcoming airflow.

“One Hour Only” indicator

Displayed if the airflow is set to weak and downward during COOL or DRY mode. (Operation varies according to model.)

The indicator goes off after one hour, at which time the airflow di- rection also changes.

Room Temperature display

Shows the room temperature. The room temperature display range is 8–39°C. The display flashes if the temperature is less than 8 °C or 39 °C or more.

Louver display

Indicates the action of the swing louver. Does not appear if the louver is station- ary.

(Power On indicator)

Indicates that the power is on.

Ventilation indicator

Appears when the unit is running in Ventilation mode.

Operation Section

Set Temperature buttons

Down

Up

Timer Menu button (Monitor/Set button)

Mode button (Return button)

Set Time buttons

Back

Ahead

Timer On/Off button (Set Day button)

Opening the door.

	TEMP.
	MENU	ON/OFF
BACK	MONITOR/SET	DAY
PAR-21MAA	CLOCK

		ON/OFF button
		Fan Speed button
		Filter	button
		(<Enter> button)
	ON/OFF	Test Run button
		Check button (Clear button)
	FILTER
	CHECK	TEST
OPERATION		Airflow Up/Down button
	CLEAR
		Louver button
		(	Operation button)
			To preceding operation
			number.

Note:

		Ventilation button
Built-in temperature sensor	(	Operation button)

To next operation number.

●“PLEASE WAIT” message

This message is displayed for approximately 3 minutes when power is supplied to the indoor unit or when the unit is recovering from a power failure.

●“NOT AVAILABLE” message

This message is displayed if a button is pressed to operate a function that the indoor unit does not have.

If a single remote controller is used to simultaneously operate multiple indoor units that are different models, this message will not be displayed if any of the indoor units is equipped with the function.

4