Preparing and using the remote control
Control panel | (11)(15)3) Remote ControlRemotecontrol(12)41)transmitter |
■Loading dry-cell batteries
■ Operating the remote |
(7) (8) (9) (10)
FAN TEMP LAMP POWER
CLASS 1 LED PRODUCT
(13)4
into the remote control
qRemove the battery cover.
control |
Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control.
• Operating the projector from the front
SOURCE | ON / STANDBY |
(2)
VOL. -
(1)
ZOOM. +
MENU/ENTER (6)
VOL. +
(5)
KEYSTONE | AUTO POSITION |
ZOOM. -
(3)(4)
(652)
wInsert the dry-cell batteries.
Load the batteries making sure that they are positioned correctly ( + to +, and - to
Approx. 15°
Approx.5m
•Operating the projector from the rear
Preparations
Two batteries (R03, SIZE AAA) are used.
| Name | : Main Function |
(1) | ON/STANDBY button | : Turns the power on/off (standby). p.20 |
(2) | SOURCE button | : Selects source. p.22 |
(3) | KEYSTONE button | : Adjusts keystone (trapezoidal distortion). p.25 |
(4) | AUTO POSITION button | : Sets up image and mode. p.24 |
(5) | MENU/ENTER button | : Displays menus and makes selections. p.29 |
(6) | Selection buttons | : Menu selections and adjustments, etc. p.29 |
(7) | FAN indicator | : Displays cooling fan mode. p.23 p.35 |
(8) | TEMP indicator | : Lights when internal temperature too high. p.35 |
(9) | LAMP indicator | : Displays lamp mode. p.21 |
(10) POWER indicator | : Displays whether power is on or off. p.20 | |
(11) MUTE button | : Cuts off the picture and sound temporarily. p.26 | |
(12) STILL button | : Pauses image. p.26 | |
(13) EXPAND buttons | : Enlarge picture size. p.27 | |
(14) EXPAND OFF button | : Exiting the operation. p.28 | |
(15) CALL button | : Displays the information on the screen. p.28 | |
Note
•For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒ 
; MENU/ENTER button ⇒ 
e | Replace the battery cover. | Approx. 15° | |
Approx. | |||
|
| ||
|
| 5m |
Dry-cell batteries
•Before using the batteries, be sure to observe the ABOUT REMOTE BATTERIES described in previous pages.
•Remove batteries from remote control when not using for extended periods.
•If the remote control stops working, or if its range decreases, replace all the batteries with new ones.
The remote control
•The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting.
•Do not drop or bang.
•Do not leave in hot or humid locations.
•Do not get wet or place on top of wet objects.
•Do not take apart.
•In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the remote control at the main unit again, and repeat the operation.
16 | 17 |
