![](/images/new-backgrounds/1225609/22560947x1.webp)
Maintenance
Caution:
Be sure to turn off the lamp and unplug the power cord from the wall outlet before you perform any maintenance on the projector.
Cleaning of the air-filter Filter cover
Clean the
•When the temperature
inside the projector rises, the STATUS indicator will blink orange and the lamp will be turned off.
1. Put the projector upside
down and raise the lock of | Lock |
| |
the filter cover in the |
|
direction of the arrow. |
|
2. Remove the
3. Wash the
change it with a new filter.
• Use water or diluted
the filter. Rinse the filter thoroughly and let it dry completely.
4. Attach the
5.Attach the filter cover to the projector.
•Make sure that the
Important:
•If the filter is damaged or becomes extremely dirty, change it with a new filter. Contact your dealer for a new filter.
•The projector will not turn on if the
Caution:
Be sure to use the projector with an
Cleaning of the projector and the ventilation slots
Use a soft cloth to clean the projector and the ventila- tion grilles. When the grilles become dirty, wipe them with a soft cloth dampened with diluted mild deter- gent, and then wipe them with a dry cloth.
To protect the surface of the projector from fading or deteriorating:
•Do not spray insecticide on or inside the projector.
•Do not use benzine or thinner to clean it.
•Do not let rubber or plastic materials come into contact with projector.
Cleaning of the lens
Use a standard
EN – 24