![](/images/new-backgrounds/1225609/22560951x1.webp)
Troubleshooting (continued)
Images aren't projected correctly.
Problem | Cause and solution | |
Projected images are | • Check that the cable connected to the external device isn't intermittent. | |
shaking. | • Connect the cable's plug with the external device's connector firmly. | |
Projected images are | • Press the AUTO POSITION button. | |
displaced. | • Some computers output | |
|
| page 19.) |
|
| |
Projected images are | • Adjust the projector and the screen so that they are perpendicular to each other. (See page | |
distorted. |
| 12.) |
|
| |
Projected images are | • Adjust BRIGHTNESS in the IMAGE menu. (See page 18.) | |
dark. | • Replace the lamp. (See page 23.) | |
|
| |
Projected images are | • Adjust the focus. (See page 13.) | |
blurred. | • | Clean the lens. |
| • Press the $ or % button on the remote control to eliminate flicker. | |
| • Adjust BRIGHTNESS and CONTRAST in the IMAGE menu. (See page 18.) | |
| • Adjust the projector and the screen so that they are perpendicular to each other. (See page | |
|
| 12.) |
Afterimages persist on | • This phenomenon is improved by keeping projecting an evenly bright image. (Such "image | |
the screen. |
| |
|
| image is kept displayed on the screen for a long time.) |
Red, blue, and green | • This phenomenon is unique to LCD projector and isn't a product malfunction. | |
dots appear in projected |
| (A small number of pixels always stay on or off, which are not malfunctions. More than |
images. |
| 99.99% of the pixels are effective.) |
Black dots appear in |
|
|
projected images. |
|
|
Fine streak pattern | • It occurs because of interference with the screen and isn't a product malfunction. Change | |
appears in projected |
| the screen or readjust the focus of the projector. |
images. |
|
|
Projected images (and/ | • Connect the cable's plug with the external device's connector firmly. | |
or audio) appear wavy | • Keep the projector away from equipment generating interfering radio waves. | |
and distorted. | • When the keystone adjustment is carried out, the image may not be displayed correctly | |
|
| because of the type of input signal. This isn’t a product malfunction. In this case, readjust |
|
| the keystone so that the amount of keystone correction is as small as possible. |
Tint in projected images | • Check that COMPUTER INPUT in the SIGNAL menu is correctly set. (See page 17.) | |
is incorrect. | • Check that the cable connected to the external device isn't broken. | |
Only the motion areas | • This is caused by the computer being used. Contact the manufacturer of your computer. | |
in the images supplied |
|
|
from the computer |
|
|
aren't displayed. |
|
|
|
|
|
Projected images are | • | Match the output resolution of your computer with the resolution of the projector. For the |
obscured. |
| method to change the output resolution of the computer, contact the manufacturer of your |
|
| computer. (See page 31.) |
| • Some images and texts appear obscured during the keystone adjustment. In such cases, use | |
|
| the projector without applying the keystone adjustment. (See page 12.) |
|
|
|
EN – 26