Mitsubishi Electronics WD-73736, WD-65835, WD-60C8, WD-60735, WD-65736 Reset / Initialization

MODELS: WD-60735 / WD-60C8 / WD-65735 / WD-65736 / WD-65835 / WD-65C8 / WD-73735 /

WD-73736 / WD-73835 / WD-73C8

Reset / Initialization

SERVICE TIP:

Many customer generated symptoms, intermittent symptoms or no symptom found can be resolved by using the various Reset and Initialization options. Before visiting the customer’s home ask the customer 1st to try the System Reset button on the control panel and if this does not resolve the issue, then they can perform an A/V Reset by pressing the Guide + Format buttons on the front panel at the same time. Then, if necessary, perform a user level Initialization by pressing MENU-123-ENTERwith the remote. The customer should be made aware when settings and/or options will be reset. For more information, see the chart below.

NOTE: During Initialization, the set will reboot. Wait until the Power LED stops flashing before unplugging or powering ON the TV.

Reset / Initialization Guide

Reset Name	When to use		How to use		Resulting Action
Remote	Returns the remote control TV	1)	Set the slide switch to TV		Once the valid code has
Control TV	layer to normal operation.		position.		been entered and
Layer Reset		2) Press and hold the POWER button until it flashes			confirmed, the temot
		)	twice then release the button.		contrrol has been reset.
		3)	Enter the code 0 0 9 3 5.
Remote	Returns the volume and mute	1)	(1)	Set the slide switch to TV position.	The remote will now
Control TV	functions of the remote control to	2)	(2)	Press and hold the POWER button until it	operate the TV's volume
Volume/Mute	TV volume and mute for TV,	)	flashes twice then release the button.		and mute when the slide
functions	Cable/Sat, VCR and DVD layers	3)	(3)	Enter the code 9 9 3 VOL UP.	switch is in the TV,
	after the Audio Lock for AV				CABLE/SAT, VCR or
	Receiver feature has been used.				DVD positions.
A/V Memory	When the audio and or video	MENU --> Audio/Video--> AV Reset			All Audio and Video
Reset, by	settings for a single input seems to				settings for the individual
individual input	be incorrect.				input are reset except for
					the Listen To, Language,
					Balance and Closed
					Caption settings.
A/V Reset, all	To reset audio and video	W hile viewing the TV, press the front panel buttons			All Audio and Video
inputs	adjustments for all inputs to the	GUIDE + FORMAT at the same time.			settings are reset to the
	original factory settings.				factory default settings.
					No other menu options
					are changed.
System Reset	To reset the TV when it does not	Press the SYSTEM RESET button on the front panel			TV Micro Re-boots. Note:
	turn on or off, does not respond to	with a pointed object such as a pencil or paperclip.			The changes made during
	the remote control, front panel				the current TV-On period
	buttons or has other unusual				may be lost. All other
	symptoms.				previous user settings are
					not lost.
Initialize User	To reset all customer settings	Press MENU - 123 - ENTER			All customer menu
Level	except V-Chip				options and A/V settings
					except V-Chip are reset to
					factory default.
Initialize -	To reset all customer settings	MENU - 2470. Highlight INITIALIZE and press ENTER			All customer menu
Service Level					options and A/V settings
					are reset to factory
					default.
V-Chip	If V-Chip password is not known	Press QV + 9 at the same time.			Password will be
Password					bypassed. If in the V-Chip
Bypass					menu, enter a new
					password.
Unlock Front	To unlock the front panel if it has	Press and hold the front panel MENU button for 8			Front Panel becomes
Panel	been locked in the V-Chip Menu.	seconds.			operational. Other V-Chip
					settings not changed.
					Note: Cannot be
					performed while in the
					Low Power mode and the
					set is Off.

Downloaded From TV-Manual.com Manuals Page 21