MODELS:
Chassis Disassembly
Rear Inputs Cover Removal
DO NOT use a power driver on this screw.
Rear Inputs Cover Removal Procedure
1)Remove 2 nuts (B) from the RF inputs.
2)Remove screws (A) that secure the cover to the chassis.
3)Pull the Inputs Cover from the chassis..
PWB-POWER Removal
1)Remove five screws (B)
2)Disconnect all cables to the PWB-
POWER.
3)Release clips (C).
4)Carefully lift the
PWB-POWER Installation
1)Reverse the removal procedure to install a new
2)No data transfer is required.
Downloaded From
Page 8