Manuals / Brands / Computer Equipment / Projector / Mitsubishi Electronics / Computer Equipment / Projector

Mitsubishi Electronics WD620U, WD620U-G, XD600U, XD600U-G 3.FEATURE menu

1 44

Download 44 pages, 3.31 Mb

EN-24

Menu operation (continued)

3.FEATURE menu

• You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal.

*1 is not displayed and is not available in WD620U/WD620U-G.

*2 This function is not available in WD620U/WD620U-G.

Menu option Setting Feature description

ASPECT

NORMAL Automatically sets the aspect ratio in relative to the input signal. Use

this setting for most cases.

16:9 *1

Selects a desired screen position for anamorphically squeezed or hor-

izontally compressed images stored on DVD disks.

You can select from CENTER, UPPER, and LOWER by pressing the

ENTER button. (*2)

FULL Select this setting when you want to project images in the full screen.

PASSWORD FUCNTION Use this setting to activate or deactivate the password lock.

MENU POSITION 2 options Use this setting to change the position of the menu on the screen.

CINEMA MODE AUTO/OFF Select Auto to automatically activate the film mode when the input

video signal is a video signal from a film.

VIDEO SIGNAL 8 options

Select Auto to automatically set the appropriate video format in rela-

tive to the input signal. If projected images aren't displayed correctly,

select a desired video format manually.

WXGA

OFF/AUTO/1280 x 768/

1280 x 768RB/

1360x 768/ 1366 x 768/

1280x 800

Select the appropriate format when the input signal is a WXGA video

signal and the "AUTO" mode does not display images properly.

Select "OFF" when the input signal is other than a WXGA video sig-

nal.

SETUP

AUTO Select this setting to automatically change the SETUP mode.

OFF Select this setting to increase the density of black. Use this setting

when images are dark.

3.75%/7.5%

Select this setting to lower the density of black.

• When 7.5% is set, the brightness is decreased by the setup can-

cel function for the U.S.

LANGUAGE 12 languages Selects a desired language for the menu.

RESET ALL OK Resets all menu settings except for PASSWORD FUNCTION and

LANGUAGE to the default.

NORMAL

AUTO

MENU POSITION

VIDEO SIGNAL

?

ASPECT

RESET ALL

English

LANGUAGE

Aè

OK

DISPLAY INPUT

PASSWORD

FUNCTION

CINEMA MODE AUTO

1.

SETUP AUTO

WXGA AUTO

WXGA

FEATURE

opt.

Contents

Main WARNING DO NOT LOOK DIRECTLY INTO THE LENS WHEN THE PROJECTOR IS IN THE POWER ON MODE. CAUTION When using the projector in Europe: COMPLIANCE NOTICE CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, Contents Important safeguards WARNING: Overview Control panel 619 11 Terminal board Kensington Lock Overview (continued) Bottom side Remote control Remote control Battery installation Reception angle (vertical) Operation range (of the remote control) Reception angle (horizontal) Reception angle (vertical), ceiling mount Installation Layout of the projector XD600U/XD600U-G The above figures are approximate and may be slightly different from the actual measurements. Image size varies depending on the distance between the screen and the projector. Front projection Installation (continued) When the aspect ratio of the screen is 4:3 When the aspect ratio of the image is 16:10 (WXGA) When the aspect ratio of the image is 16:9 Front projection, ceiling mounting Installation (continued) Rear projection Basic connections Projector + AV device Projector + DVD player or HDTV decoder Basic connections (continued) Connection (for video equipment having an HDMI terminal) Basic connections (continued) Projector + Computer For computer with Mini D-SUB For analog connection: For monitor connection: Preparation Preparation for projection Warning: Caution: Adjustment of the projection angle Basic operation Power-on Important: When fine streaks are seen on projected images 4 6 Basic operation (continued) Power-of f 1. 2. 3. Basic operation (continued) Wall Screen When connecting to a laptop computer: Menu operation QUICK MENU QUICK MENU QUICK MENU Basic operation QUICK MENU Menu Options Set the following options provided in the respective menus. 2.INFORMATION menu 1.QUICK MENU DETAIL MENU * Menus are not displayed when no signal is supplied to the projector. LOW CONTRAST Basic operation Important: IMAGE ADVANCED menu INSTALLATION Menu Options 2.INSTALLATION menu INSTALLATION ADVANCED menu 3.FEATURE menu 4.SINGAL menu SIGNAL USER menu 5.NETWORK menu You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input. NETWORK IP CONFIG menu 6.INFORMATION menu Image adjustment Adjusting projected images To adjust the brightness (CONTRAST and BRIGHT- NESS): CONTRAST BRIGHTNESS Image adjustment (continued) BrilliantColor RGB-COLOR RGB-TINT How to adjust the image supplied from the computer using the menu: Network settings Setting Projector Name Network Password Settings IP Settings Network settings (continued) Setting or Clearing DHCP IP Address Settings Subnet Mask Settings Default Gateway Settings Network settings (continued) How to Use Network Function Glossary Advanced features Displaying a user-defined image during startup or mut- ing Procedure Freeze To stop the motion in the image temporarily (or to dis- play a still image): Advanced features (continued) To cancel the password function: Magnify To use the MAGNIFY mode: Advanced features (continued) Supervising and controlling by computer Major functions Connection Using the User Manual Lamp replacement A) When the projector is placed on the table B) When the projector is mounted to the ceiling Lamp replacement (continued) Reset of the lamp operation time Interval of lamp replacement Caution: Troubleshooting Unplug the power cord from the wall outlet and contact your dealer. No image appears on the screen. J Troubleshooting (continued) Images are not displayed correctly. Troubleshooting (continued) Others If the following problem occurs after the lamp is replaced, check the following first. Maintenance Warning: Indicators Abnormal condition Normal condition Specifications Specifications (continued) Connectors Replacement part Dimensional drawings (unit : mm) Whats included in the box Specifications (continued) Specification of RGB signals in each computer mode of the projector Mitsubishi Projector Warranty, Sales Support and Service Information MITSUBISHI ELECTRIC CORPORATION Ver.1 1 Zusho Baba, Nagaokakyo-City, Kyoto Japan