Expand
By pressing the EXPAND button on the remote control, you can magnify the image to view the details.
•The EXPAND mode doesn't function with some input signals. For details, see page 38.
EXPAND
Magnified image
To use the EXPAND mode:
1.Press the EXPAND button.
•You can select the area to be magnified by pressing the , , , or button on the remote control.
•You can change the magnification of the selected area by pressing the + or - button.
2.Press the EXPAND button again to the exit the EX- PAND mode.
•The regular operation screen will appear.
Important:
• In the EXPAND mode, you can't adjust the volume.
Picture in Picture (PinP)
One of the special features of this projector is the
To use the PinP mode
1. Press the PinP button on the remote control.
•When you press the PinP button with the image from the COMPUTER/COMPONENT VIDEO IN ter- minal displayed on the screen, the image from the VIDEO IN or
•When the image from the VIDEO IN or
2.If necessary, select the desired external input source of the sub image by using the VIDEO or
3.Press the PinP button on the remote control.
• The PinP mode will be canceled.
To change the position of the sub image:
Press the or buttons on the remote control.
Important:
•The motion may not run smoothly in the PinP mode.
•The PinP mode isn't available with some input signals. For further information, see page 38.
•When the COMPUTER 1 or COMPUTER 2 button on the remote control or the COMPUTER button on the control panel is pressed, the PinP mode will be canceled.
Still
To stop the motion in the image temporarily (or to dis- play a still image):
Press the STILL button on the remote control.
• The image will freeze temporarily.
To resume the motion in the image:
Press the STILL button on the remote control again.
Important:
•Do not display a still picture for a long time because the afterimages may persist on the screen.
ENGLISH
