Mitsubishi Electronics XD460U Using the remote control, Operational range of the remote control

Using the remote control

Operational range of the remote control

Front of projector Rear of projector

30° 30° 30° 30°

Operate the remote control within a distance of 10 m from the projector, pointing the light beam at the remote control photo- sensor (front or rear) of the projector.

•Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light.

•Keep the remote control photo-sensor at least 2 m away from fluorescent lamps. Otherwise, the re- mote control may malfunction.

•If there is an inverter-operated fluorescent lamp near the remote control, the remote control opera- tion may become unstable.

•When you use the remote control too close to the remote control sensor, the remote control may not work correctly.

ENGLISH

When operating the remote control, keep the distance from the remote control to the projector via the screen within about 5 m. The operable range of the remote control, however, depends on the characteristics of the screen.

Reception angle

Vertical directions

20°

10°

20°

10°

Vertical directions (ceiling mount)

20°

20°

EN-9