Preparating your projector (Continue)
Bottom side
1
2
1Adjustment foot (Front)
2Lamp cover
3Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns.
Remote control
1
2
3
4
5
6
7
8
9
10
11
12
13
3
| 1 | 2 | 27 |
| COMPUTER |
| |
VIDEO | 26 | ||
|
|
| |
HOME | PageUP | AUTO POSITION | 25 |
|
|
| |
END | PageDOWN | LASER | 24 |
|
|
| |
|
|
| 23 |
|
|
| 22 |
|
|
| 21 |
MENU | ENTER | 20 | |
|
|
| |
|
| KEYSTONE | 19 |
|
|
| |
VOLUME | ASPECT | 18 | |
|
|
| |
WALL SCREEN EXPAND | PinP | 17 | |
|
|
| |
CE | MUTE | STILL | 16 |
|
|
| |
15
14
28
1Laser aperture
2Transmission window
3Indicator
4POWER button
5VIDEO button
6
7HOME button
8END button
9Mouse pointer
10MENU button
11+ , - (VOLUME) buttons
12WALL SCREEN button
13COLOR ENHANCER button
14MUTE button (Audio/Video)
15EXPAND button
16STILL button
17PinP button
18ASPECT button
19KEYSTONE button
20ENTER button
21
22Direction buttons
23LASER button
24AUTO POSITION button
25Page UP/DOWN buttons
26
27COMPUTER 1, 2 buttons
28
•The + and - buttons are used in the KEYSTONE adjustment and the EXPAND mode in addition to the volume control.
•Pressing the LASER button emits a laser beam. Even when you keep holding down the LASER button, it is emitted only one minute. To keep emitting it longer, press the LASER button again.
•You can disable the LASER button to prevent laser radiation due to misuse of the button.
How to disable the LASER button
While holding the LASER button down, press the button three times.
How to enable the LASER button
While holding the LASER button down, press the button three times.
•Whenever the batteries are replaced, the LASER button is enabled.
About the laser beam
This remote control is a Class 2 laser product. (Max. output : 1 mW, Wavelength :
Beam Divergence : 6m distance about 10.0mm x 10.0mm (±6.0mm)
CAUTION :
•Pressing the LASER button on the remote control emits a laser beam. Do not look into the laser beam directly. Do not point the laser beam at anyone. Looking at the laser beam directly may damage eyesight.
•Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.
•This remote controller cannot be repaired.
