Indicators
The projector has three LED Indicators which shows the working condition of the projector.
The following offers solutions to possible problems. If a problem persists, turn the projector off and consult your dealer.
POWER indicator |
|
|
|
|
| COMPUTER | AUTO | MUTE | ||
|
|
|
|
| ||||||
|
|
|
|
| POSITION | |||||
LAMP indicator |
|
| LAMP | VOLUME SOURCE | ||||||
|
|
|
| |||||||
|
|
|
| |||||||
TEMP indicator |
|
|
| TEMP |
|
|
| VIDEO | MENU | ENTER |
|
|
|
|
|
| |||||
Normal condition
POWER LAMP | TEMP CONDITION | Notes | |
| Off |
| |
Steady | Off |
| |
red |
|
|
|
|
| Lamp | The power button cannot be used to switch |
Steady | Blinking | Off | ON and OFF |
green | green |
| |
|
| The POWER is ON. (Normal condition) |
|
Steady | Steady | Off |
|
green | green |
|
|
Abnormal condition
POWER LAMP TEMP CONDITION | POSSIBLE SOLUTIONS |
Steady | Steady | Blinking |
green | green | red |
Steady | Off | Blinking |
red |
| red |
Unusual temperature
•The ventilation slits or air filter is clogged with dust or debris.
•The room temperature is too high.
•The filter is dirty.
•Remove the object from the ventilation slits.
•Relocate the projector to a cooler place.
•Clean the filter.
|
|
| The protection circuit is working or the lamp is in an | • Wait until the LAMP indicator is turned |
Steady | Blinking | Off | abnormal condition. | off, then press the POWER button. |
red | green |
| (The indicators operate as shown on the left at the time of | • If the above operation is not effective, |
|
|
| replace the lamp. | |
|
|
| abnormal condision.) | |
Steady |
| Off | The lamp operation time exceeds the time elapsed until the | Replace the lamp. |
Blinking | lamp shutdown notice. (See page 21.) The POWER is on. | Exchange with a new lamp if the same | ||
green | green/red |
| ||
|
|
| The lamp operation time exceeds the time elapsed until the | problem recurs. |
|
| Off |
| |
Steady | Blinking | lamp shutdown notice. (See page 21.) The POWER is off. |
| |
red | red |
|
|
|
|
| Off | The lamp operation time exceeds the time elapsed until the |
|
Steady | Steady | lamp shutdown. (See page 21.) |
| |
red | red |
|
|
|
|
|
| The lamp cover is not closed. | Close the cover correctly. |
Blinking | Off | Off |
|
|
green/red |
|
|
|
|
| Steady | Steady | Abnormal. | Contact your dealer. |
|
|
| ||
Blinking | or | or |
|
|
|
|
|
| |
green/red |
|
|
|
|
| Blinking | Blinking |
|
|
EN – 24
