![](/images/new-backgrounds/1191320/19132035x1.webp)
Picture adjustment
User memory for signal setting
This projector can memorize the maximum of 2 signal menu settings.
Memorizing the setting
1.Select MEMORIZE in the SIGNAL menu, and press the ENTER button.
2.Press the $ or %button to select the memory which you wish to record (USER 1 or USER 2).
3.Press the ENTER button.
•Any buttons are ineffective about 3 seconds of recording setting. Wait for recording to have been completed before operating the buttons.
Select the user setting
Select MEMORY CALL in SIGNAL menu, and press the $ or % button to select the memory (USER 1 or USER 2).
Reset the recorded setting
1.Select DELETE in the SIGNAL menu, and press the ENTER button.
2.Press the $ or %button to select the memory which you wish to reset (USER 1 or USER 2).
3.Press the ENTER button.
The recorded setting will be reset.
•Any buttons are ineffective about 3 seconds of resetting the recorded setting. Wait for resetting to have been completed before operating the buttons.
Adjusting the image
You can adjust the picture by using the IMAGE menu.
To adjust the red-green color balance of the im- age :
Adjust TINT in IMAGE menu. Press the % button to increase the amount of green in the image and the
$button to increase the amount of red in the image.
To adjust the detail and clarity of the image : Adjust SHARPNESS in IMAGE menu. Press the % button to make the picture seem sharper and the $ button to make it softer.
Color matrix
This feature adjusts the color balance in each color of RGB (Red, Green, Blue), and their neutral colors (yellow, cyan, magenta) by using Color correction adjustment. Use Color correct adjustment when enphasizing a specific color, or when only a certain color balance is not correctly adjusted.
1.Select COLOR MATRIX in IMAGE menu.
2.Press the $ or % button to select USER .
3.Press the ENTER button.
COLOR MATRIX
|
| RED |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| YELLOW |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| GREEN |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| CYAN |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| BLUE |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
| MAGENTA |
|
|
|
| 0 |
|
|
|
| ||||
|
| SATURATION |
|
|
|
| 0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0 | |
|
|
|
|
|
|
|
|
opt.
IMAGE
XGA60
4. Press the { or }button to select the desired color. |
• If you wish to adjust the color intensity of the |
image, select SATURATION. |
|
| CONTRAST | 0 |
|
|
|
|
|
| BRIGHTNESS | 0 |
|
|
|
|
|
| sRGB | OFF |
|
|
|
|
|
| COLOR MATRIX | COMPUTER |
|
|
|
|
|
| COLOR TEMP. | STANDARD |
|
|
|
|
|
| COLOR | 0 |
|
|
|
|
|
| TINT | 0 |
|
|
|
|
|
| SHARPNESS | 0 |
|
|
|
|
|
| GAMMA MODE | AUTO |
|
|
|
|
To control the level of white-to-black in the image :
Adjust CONTRAST in IMAGE menu. Press the % button to increase the contrast and the $ button to reduce it.
To control the light level of the image :
Adjust BRIGHTNESS in IMAGE menu. Press the
%button to lighten the image and the $ button to darken the image.
To determine the intensity of the color :
Adjust COLOR in IMAGE menu. Press the % button to increase the amount of color in the image and the $ button to decrease it.
| • If you wish to adjust the all color balance of the |
| image, select |
5. | Press the $ or % button to adjust the color bal- |
| ance of the color. |
6. | Repeat steps 4 and 5 for more adjustments. |
7. | Exit the menu system by pressing the MENU but- |
| ton several times. |
•When using the setting which has been already prepared, select desired position VIDEO or COMPUTER in step 2. When the source is selected to VIDEO(1) or
•When not using Color matrix adjustment, select OFF in step 2.
EN – 18