![](/images/new-backgrounds/1191320/19132019x1.webp)
Basic connections
This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players.
Important:
•Make sure that your equipment is turned off before connection.
•Plug in firmly and unplug by holding the plug, not by pulling the AC power cord.
•If connected units are set too close to one another, the image may be affected.
•Refer to the user manual of each component for details of connections.
Projector + AV equipment
Important:
•Match the color of video and audio plugs on the AV cable with the connections.
| to | ||
| L | MAIN | |
COMPUTER IN | R |
| to video input |
|
| ||
|
| VIDEO |
|
|
| AC IN |
|
| AUDIO IN VIDEO IN | to audio input | |
COMPUTER OUT |
|
|
to audio output to video output
VCR etc. | to |
|
•Speaker output is mono.
•Select VIDEO for the AUDIO MODE in the FEATURE menu to hear and to sound for the VIDEO. (Refer to page 17).
Projector + DVD player or HDTV decoder
Some DVD players have output terminal for 3 line fitting (Y, CB, CR). When connecting them to the projector, connect to COMPUTER IN of the projector.
DVD player or HDTV decoder
AUDIO cable
to AUDIO IN
Y CB(PB) CR(PR) | to AUDIO OUT |
|
BNC - RCA connector (optional)
No connection
G | B | R | HD/CS | VD |
|
|
to COMPUTER
IN
Mini
L | MAIN |
COMPUTER IN
R
VIDEO
AC IN
AUDIO IN VIDEO IN
COMPUTER OUT
•Y, PB, PR is an example of the terminal names for a HDTV decoder.
•The terminal name is different depending on the connected equipment.
•Use mini
•Some DVD players may not project the image correctly.
•When connecting with HDTV equipment which has R, G, B output, select RGB for the COMPUTER INPUT in the SIGNAL menu.
EN – 10