Lexmark 792de, 47B0001, 47BT001 manual Understanding printer menus 125, Alarms, Timeouts

Understanding printer menus		125
	Menu item	Description
	Alarms	Sets an alarm to sound when the printer requires user
	Alarm Control	intervention
	Cartridge Alarm	Available options for each alarm type are:
	Staple Alarm	Off
	Hole Punch Alarm	Single
		Continuous
		Notes:
		• Single is the factory default setting for Alarm Control and
		Cartridge Alarm. Single sounds three quick beeps.
		• Off is the factory default setting for Staple Alarm and Hole
		Punch Alarm. Off means no alarm will sound.
		• Continuous repeats three beeps every 10 seconds.
	Timeouts	Specifies the number of minutes of inactivity before the system
	Standby Mode	enters a lower power state
	Disabled	Note: 15 minutes is the factory default setting.
	1–240
	Timeouts	Specifies the number of minutes of inactivity before some
	Sleep Mode	systems begin entering a minimum power state
	Disabled	Notes:
	1–240	• 30 minutes is the factory default setting.
		• A lower setting conserves more energy, but may require
		longer warm‑up times.
		• Select the lowest setting if the printer shares an electrical
		circuit with room lighting.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.
		• Sleep mode does not interact with Standby mode.
	Timeouts	Sets the amount of time (in seconds) the printer waits before
	Screen Timeout	returning to a ready state
	15–300	Note: 30 seconds is the factory default setting.
	Timeouts	Sets the amount of time (in seconds) the printer waits to receive
	Print Timeout	an end‑of‑job message before canceling the remainder of the
	Disabled	print job
	1–255	Notes:
		• 90 seconds is the factory default setting.
		• When the timer expires, any partially printed page still in
		the printer is printed, and then the printer checks to see if
		any new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print
		jobs.