Lexmark 47BT001, 47B0001 Network/Ports menu, Active NIC menu, Standard Network or Network x menus

Understanding printer menus 103

Network/Ports menu

Active NIC menu

Menu item	Description
Active NIC	Notes:
Auto	• Auto is the factory default setting.
[list of available network cards]
	• This menu item appears only if an optional network card is installed.

Standard Network or Network [x] menus

Note: Only active ports appear in this menu; all inactive ports are omitted.

Menu item	Description
PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job requires
On	it, regardless of the default printer language
Off	Notes:
	• On is the factory default setting.
	• When Off is used, the printer does not examine incoming data. The printer
	uses PostScript emulation if PS SmartSwitch is set to On. It uses the default
	printer language specified in the Setup menu if PS SmartSwitch is set to Off.
PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job requires
On	it, regardless of the default printer language
Off	Notes:
	• On is the factory default setting.
	• When Off is used, the printer does not examine incoming data. The printer
	uses PCL emulation if PCL SmartSwitch is set to On. It uses the default printer
	language specified in the Setup menu if PCL SmartSwitch is set to Off.
NPA Mode	Sets the printer to perform the special processing required for bidirectional
Auto	communication following the conventions defined by the NPA protocol
Off	Notes:
	• Auto is the factory default setting.
	• Changing this setting from the printer control panel and then exiting the
	menus causes the printer to restart. The menu selection is then updated.