Lexmark 792de, 47B0001, 47BT001 manual PCL Emul menu, Understanding printer menus 140

Understanding printer menus 140

PCL Emul menu

Menu item	Description
Font Source	Specifies the set of fonts used by the Font Name menu item
Resident	Notes:
Disk
	• Resident is the factory default setting. It shows the factory default set of
Download
	fonts downloaded in RAM.
Flash
	• Flash and Disk settings show all fonts resident in that option. Make sure
All
	the flash option is properly formatted and is not read/write‑, or
	password‑protected.
	• Download shows all the fonts downloaded in RAM.
	• All shows all fonts available to any option.
Font Name	Identifies a specific font and where it is stored
RO Courier	Note: RO Courier is the factory default setting. The RO Courier format shows
	the font name, font ID, and storage location in the printer. The font source
	abbreviation is R for Resident, F for Flash, K for Disk, and D for Download.
Symbol Set	Specifies the symbol set for each font name
10U PC‑8	Notes:
12U PC‑850	• 10U PC‑8 is the US factory default setting. 12U PC‑850 is the international
	factory default setting.
	• A symbol set is a set of alphabetical and numeric characters, punctuation,
	and special symbols. Symbol sets support the different languages or
	specific programs such as math symbols for scientific text. Only the
	supported symbol sets are shown.
PCL Emulation Settings	Changes the point size for scalable typographic fonts
Point Size	Notes:
1.00–1008.00
	• 12 is the factory default setting.
	• Point Size refers to the height of the characters in the font. One point
	equals approximately 1/72 of an inch.
	• Point sizes can be increased or decreased in 0.25‑point increments.
PCL Emulation Settings	Specifies the font pitch for scalable monospaced fonts
Pitch	Notes:
0.08–100
	• 10 is the factory default setting.
	• Pitch refers to the number of fixed‑space characters per inch (cpi).
	• Pitch can be increased or decreased in 0.01‑cpi increments.
	• For non‑scalable monospaced fonts, the pitch appears on the display but
	cannot be changed.