Lexmark 792de Too many trays attached, Incompatible output bin, Remove defective disk, Disk full

Troubleshooting 185

4Connect the power cord to a properly grounded outlet.

5Turn the printer back on.

58 Too many trays attached

1Turn the printer off.

2Unplug the power cord from the wall outlet.

3Remove the additional trays.

4Connect the power cord to a properly grounded outlet.

5Turn the printer back on.

59 Incompatible output bin [x]

Try one or more of the following:

•Remove the specified output bin.

•Touch Continue to clear the message and continue printing without using the specified output bin.

61 Remove defective disk

Try one or more of the following:

•Remove the defective printer hard disk.

•Install a different printer hard disk before performing any operations that require a printer hard disk.

62 Disk full

Try one or more of the following:

•Touch Continue to clear the message and continue processing.

•Delete fonts, macros, and other data stored on the printer hard disk.

•Install a printer hard disk with larger capacity.

80.xx Fuser near life warning

1Order a replacement fuser immediately.

2When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.

3Touch Continue to clear the message and continue printing.

80.xx Fuser life warning

•Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part.

•Touch Continue to clear the message and continue printing.