Lexmark 47B0001, 47BT001, 792de manual Loading the multipurpose feeder

Loading paper and specialty media 69

Loading the multipurpose feeder

The multipurpose feeder can hold several sizes and types of print media, such as transparencies, labels, card stock, and envelopes. It can be used for single-page or manual printing, or as an additional tray.

The multipurpose feeder can hold approximately:

•100 sheets of 75‑g/m2 (20‑lb) paper

•10 envelopes

•75 transparencies

The multipurpose feeder accepts paper or specialty media within the following dimensions:

•Width—89 mm (3.5 in.) to 229 mm (9.02 in.)

•Length—127 mm (5 in.) to 1270 mm (50 in.)

Note: Maximum width and length can be applied only to short-edge feeding.

Note: Do not add or remove paper or specialty media when the printer is printing from the multipurpose feeder or when the printer control panel indicator light is blinking. Doing so may cause a jam.

1Pull down the multipurpose feeder door.

2For paper or specialty media that is longer than letter-size paper, gently pull the extension until it is fully extended.

3Flex the sheets of paper or specialty media back and forth to loosen them. Do not fold or crease them. Straighten the edges on a level surface.