Lexmark 47B0001, 792de Adjusting Sleep Mode, Using Hibernate Mode, Using the Embedded Web Server

Minimizing your printer's environmental impact 60

Choose	To
Off	Use factory default settings. This setting supports the
Note: Selecting Photo from the driver may disable Quiet	performance specifications of your printer.
Mode.
On	Reduce printer noise.
	• Print jobs will process at reduced speed.
	• Fans run at reduced speed or are turned off.
	• If your printer has faxing capability, fax sounds are
	reduced or disabled, including those made by the fax
	speaker and ringer. The fax is placed in standby mode.
	• The alarm control and cartridge alarm sounds are turned
	off.

Adjusting Sleep Mode

To save energy, you can decrease the number of minutes before the printer enters Sleep Mode. Available settings range from 1–240 minutes. The factory default setting is 30 minutes.

Using the Embedded Web Server

1Type the printer IP address into the address field of your Web browser. If you do not know the IP address of the printer, you can:

•View the IP address on the printer control panel in the TCP/IP section under the Networks/Ports menu.

•Print a network setup page or the menu settings pages and locate the IP address in the TCP/IP section.

2Click Settings > General Settings > Timeouts.

3In the Sleep Mode field, enter the number of minutes you want the printer to wait before it enters Sleep Mode.

4Click Submit.

Using the printer control panel

1From the home screen, navigate to:

> Settings > General Settings > Timeouts > Sleep Mode

2In the Sleep Mode field, select the number of minutes you want the printer to wait before it enters Sleep Mode.

3Touch .

Using Hibernate Mode

Hibernate is an ultra‑low power operating mode. When operating in Hibernate mode, all other systems and devices are powered down safely.

Using the Embedded Web Server

1Type the printer IP address into the address field of your Web browser.