Lexmark 792de, 47B0001, 47BT001 manual Understanding printer menus 134, Staple Job, Offset Pages

Understanding printer menus		134
	Menu item	Description
	Paper Saver	Specifies that multiple‑page images be printed on one side of a paper
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	Paper Saver Ordering	Specifies the positioning of multiple‑page images
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of page images and whether they are in
	Vertical
		portrait or landscape orientation.
	Paper Saver Orientation	Specifies the orientation of a multiple‑page document
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	Paper Saver Border	Prints a border on each page image
	None	Note: None is the factory default setting.
	Solid
	Staple Job	Specifies whether prints are stapled
	Off	Note: This menu appears only when a stapler is installed.
	On
	Hole Punch	Specifies whether prints have punched holes
	Off	Note: This menu appears only when a puncher is installed.
	On
	Hole Punch Mode	Determines the type of punch finishing performed on a print
	2 holes	Notes:
	3 holes
		• 3 holes is the US factory default setting. 4 holes is the international factory
	4 holes
		default setting.
		• This menu appears only when a puncher is installed.
	Offset Pages	Offsets pages at certain instances
	None	Notes:
	Between Copies
		• None is the factory default setting.
	Between Jobs
		• Between Copies offsets each copy of a print job if Collate is set to On. If Collate
		is set to Off, then each set of printed pages are offset, such as all page 1's and
		all page 2's.
		• Between Jobs sets the same offset position for the entire print job regardless
		of the number of copies printed.
		• This menu appears only when a stapler is installed.