Lexmark 47B0001, 47BT001, 792de manual Understanding printer menus 114

Understanding printer menus		114
	Menu item	Description
	Protocol	Selects the hardware and software handshaking settings for the serial port
	DTR	Notes:
	DTR/DSR
		• DTR is the factory default setting.
	XON/XOFF
		• DTR/DSR is a hardware handshaking setting.
	XON/XOFF/DTR
	XONXOFF/DTRDSR	• XON/XOFF is a software handshaking setting.
		• XON/XOFF/DTR and XON/XOFF/DTR/DSR are combined hardware and
		software handshaking settings.
	Robust XON	Determines whether the printer communicates availability to the computer
	Off	Notes:
	On
		• Off is the factory default setting.
		• This menu item applies only to the serial port if Serial Protocol is set to
		XON/XOFF.
	Baud	Specifies the rate at which data can be received through the serial port
	9600	Notes:
	19200
		• 9600 is the factory default setting.
	38400
		• 138200, 172800, 230400, and 345600 baud rates are only displayed in the
	57600
	115200	Standard Serial menu. These settings do not appear in the Serial Option 1,
		Serial Option 2, or Serial Option 3 menus.
	138200
	172800
	230400
	345600
	1200
	2400
	4800
	Data Bits	Specifies the number of data bits sent in each transmission frame
	8	Note: 8 is the factory default setting.
	7
	Parity	Sets the parity for serial input and output data frames
	None	Note: None is the factory default setting.
	Ignore
	Even
	Odd
	Honor DSR	Determines whether the printer uses the DSR Signal
	Off	Notes:
	On
		• Off is the factory default setting.
		• DSR is a handshaking signal used by most serial cables. The serial port uses
		DSR to distinguish data sent by the computer from data created by electrical
		noise in the serial cable. The electrical noise can cause stray characters to
		print. Set this to On to prevent stray characters from printing.