Lexmark 792de manual Understanding printer menus 104, Network Buffer, Job Buffering, Mac Binary PS

Understanding printer menus		104
	Menu item	Description
	Network Buffer	Sets the size of the network input buffer
	Auto	Notes:
	3KB to [maximum size allowed]
		• Auto is the factory default setting.
		• The value can be changed in 1‑KB increments.
		• The maximum size allowed depends on the amount of memory in the printer,
		the size of the other link buffers, and whether Resource Save is set to On or
		Off.
		• To increase the maximum size range for the Network Buffer, disable or
		reduce the size of the parallel, serial, and USB buffers.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Job Buffering	Temporarily stores print jobs on the printer hard disk before printing. This menu
	Off	only appears if a formatted disk is installed.
	On	Notes:
	Auto	• Off is the factory default setting.
		• On buffers print jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	On
		• Auto is the factory default setting.
	Off
		• Off filters print jobs using the standard protocol.
		• On processes raw binary PostScript print jobs.
	Standard Network Setup	Displays and sets the printer network settings.
	Reports	Note: The Wireless menu appears only when the printer is connected to a wireless
	Network Card	network.
	TCP/IP
	IPv6
	Wireless
	AppleTalk
	Network [x] Setup
	Reports
	Network Card
	TCP/IP
	IPv6
	Wireless
	AppleTalk