Lexmark 792de, 47B0001 Parallel x menu, Understanding printer menus 110, ENA Address, ENA Netmask

Understanding printer menus		110
	Menu item	Description
	Job Buffering	Temporarily stores print jobs on the printer hard disk before printing
	Off	Notes:
	On
		• Off is the factory default setting.
	Auto
		• On buffers jobs on the printer hard disk.
		• Auto buffers print jobs only if the printer is busy processing data from another
		input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is then updated.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	On
		• Auto is the factory default setting.
	Off
		• On processes raw binary PostScript print jobs.
		• Off filters print jobs using the standard protocol.
	ENA Address	Sets the network address information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Netmask	Sets the netmask information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
	ENA Gateway	Sets the gateway information for an external print server
	yyy.yyy.yyy.yyy	Note: This menu item is available only if the printer is attached to an external print
		server through the USB port.
Parallel [x] menu
	Menu item	Description
	PCL SmartSwitch	Sets the printer to automatically switch to PCL emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
		PostScript emulation if PS SmartSwitch is set to On. It uses the default printer
		language specified in the Setup menu if PS SmartSwitch is set to Off.
	PS SmartSwitch	Sets the printer to automatically switch to PS emulation when a print job received
	On	through a serial port requires it, regardless of the default printer language
	Off	Notes:
		• On is the factory default setting.
		• When set to Off, the printer does not examine incoming data. The printer uses
		PCL emulation if PCL SmartSwitch is set to On. It uses the default printer
		language specified in the Setup menu if PCL SmartSwitch is set to Off.