Lexmark 47BT001, 47B0001, 792de manual IPv6 menu, Understanding printer menus 106

Understanding printer menus		106
	Menu item	Description
	IP Address	Lets you view or change the current TCP/IP address
		Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP
		settings to Off. It also sets Enable BOOTP and Enable RARP to Off on systems that
		support BOOTP and RARP.
	Netmask	Lets you view or change the current TCP/IP netmask
	Gateway	Lets you view or change the current TCP/IP gateway
	Enable DHCP	Specifies the DHCP address and parameter assignment setting
	On	Note: On is the factory default setting.
	Off
	Enable RARP	Specifies the RARP address assignment setting
	On	Note: On is the factory default setting.
	Off
	Enable BOOTP	Specifies the BOOTP address assignment setting
	On	Note: On is the factory default setting.
	Off
	Enable AutoIP	Specifies the Zero Configuration Networking setting
	Yes	Note: Yes is the factory default setting.
	No
	Enable FTP/TFTP	Enables the built-in FTP server, which allows you to send files to the printer using File
	Yes	Transfer Protocol.
	No	Note: Yes is the factory default setting.
	Enable HTTP Server	Enables the built-in web server (Embedded Web Server). When enabled, the printer
	Yes	can be monitored and managed remotely using a web browser.
	No	Note: Yes is the factory default setting.
	WINS Server Address	Lets you view or change the current WINS server address
	Enable DDNS	Lets you view or change the current DDNS setting
	Yes	Note: Yes is the factory default setting.
	No
	Enable mDNS	Lets you view or change the current mDNS setting
	Yes	Note: Yes is the factory default setting.
	No
	DNS Server Address	Lets you view or change the current DNS server address
	Enable HTTPS	Lets you view or change the current HTTPS setting
	Yes	Note: Yes is the factory default setting.
	No

IPv6 menu

Note: This menu is available only in network models or in printers attached to print servers. This menu is available from the Network/Ports menu: