Lexmark 792de, 47B0001, 47BT001 manual Removing a printer hard disk, Additional printer setup

Additional printer setup 38

Removing a printer hard disk

Note: This task requires a flathead screwdriver.

Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components or connectors.

1Access the system board.

For more information, see “Accessing the system board” on page 23.

2Unplug the printer hard disk interface cable from the system board, leaving the cable attached to the printer hard disk. To unplug the cable, squeeze the paddle at the plug of the interface cable to disengage the latch before pulling the cable out.

3Remove the screws while holding the printer hard disk in place, and then remove the printer hard disk.

1

2