Lexmark 47B0001, 47BT001, 792de manual Installing the printer on a wireless network Macintosh

Additional printer setup 48

cPress Enter or click OK.

Note: D is the letter of your CD or DVD drive.

4Click Install, and then follow the instructions on the computer screen.

5Select Wireless connection when asked to choose a connection type.

6From the Wireless Configuration dialog, select Guided Setup (Recommended). Note: Choose Advanced Setup only if you want to customize your installation.

7Temporarily connect a USB cable between the computer on the wireless network and the printer.

Note: After the printer is configured, the software will instruct you to disconnect the temporary USB cable so you can print wirelessly.

8Follow the instructions on the computer screen.

Note: For more information on allowing other computers on the network to use the wireless printer, see the Networking Guide.

Installing the printer on a wireless network (Macintosh)

Note: Make sure to disconnect the Ethernet cable when installing the printer on a wireless network.

Prepare to configure the printer

1Connect the power cord to the printer, then to a properly grounded electrical outlet, and then turn on the printer.

2

1