Lexmark 47BT001, 47B0001, 792de Custom Names menu, Custom Bin Names menu, Universal Setup menu

Understanding printer menus 100

Custom Names menu

Menu item	Definition
Custom Name [x]	Specify a custom name for a paper type. This name replaces the Custom
[none]	Type [x] name in the printer menus.

Custom Bin Names menu

Menu Item

Standard Bin

Bin [x]

Description

Specifies a custom name for the Standard Bin

Specifies a custom name for Bin [x]

Universal Setup menu

These menu items are used to specify the height and width of the Universal paper size. The Universal paper size is a user‑defined paper size setting. It is listed with the other paper size settings and includes similar options, such as support for duplex printing and printing multiple pages on one sheet.

Menu item	Description
Units of Measure	Identifies the unit of measure
Inches	Note: Inches is the US factory default setting. Millimeters is the
Millimeters	international factory default setting.
Portrait Width	Sets the portrait width
3–48 inches	Notes:
76–1219 mm
	• If the width exceeds the maximum, then the printer uses the
	maximum width allowed.
	• 8.5 inches is the US factory default setting. 216 mm is the
	international factory default setting.
	• The width can be increased in 0.01‑inch or in 1‑mm increments.
Portrait Height	Sets the portrait height
3–48 inches	Notes:
76–1219 mm
	• If the height exceeds the maximum, then the printer uses the
	maximum height allowed.
	• 14 inches is the US factory default setting. 356 mm is the
	international factory default setting.
	• The height can be increased in 0.01‑inch or in 1‑mm increments.
Feed Direction	Specifies the feed direction
Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray.