Mitsumi electronic 738 Series, 838 Series A/V Receiver with HDMI Output, For assistance call

2. TV Connections 13

A/V Receiver

Most setups require either a digital audio cable or analog stereo audio cables. To send audio from TV channels received on the ANT input or devices con- nected directly to the TV, you must use one of the con- nections shown below.

The TV makes all audio available in digital and analog formats:

•Analog audio coming into the TV is available as output in digital stereo format on the DIGITAL AUDIO OUTPUT jack.

•Digital incoming audio is available as analog output on the AUDIO OUTPUT L and R jacks.

			DIGITAL	DVI/PC AUDIO	R	AUDIO	L	ANT
			AUDIO	R INPUT L		OUTPUT
			OUTPUT
				Y/ VIDEO	Pb	Pr	2	3DAUDIO
	HDMI		DIGITAL				INPUT		L
								GLASSES
1	2	3	LAN				R	EMITTEROUTPUT
			AUDIO				1
			OUTPUT				INPUT
				Y/ VIDEO	Pb	Pr
			R AUDIO	L	(480i / 480p / 720p / 1080i)

TV main panel

or Digital coaxial

cable (for a digital

A/V receiver) Stereo analog cables (for an analog A/V receiver)

A/V Receiver with HDMI Output

Required: One HDMI-to-HDMI cable

This option allows you to view content from devices connected to an A/V receiver. The A/V receiver can send audio and video to the TV over a single HDMI cable. You can use an HDMI connection as described here in addition to an audio connection from the TV’s audio output. The optional audio connection allows you to hear, through the A/V receiver, devices connected to the TV only, e.g., an antenna on the ANT input.

838 Series: This setup allows you to use Net- Command-controlled audio and video switching over the HDMI cable. See the full owner’s guide at www.mitsubishi-tv.com for details.

		DIGITAL	DVI/PC AUDIO			AUDIO	ANT
		AUDIO			R		L
		OUTPUT	R INPUT	L		OUTPUT
	HDMI		Y/ VIDEO	Pb		Pr	2
							GLASSESAUDIO
			DIGITAL				3D
		LAN					INPUTR EMITTER	L
1	2	3	AUDIO				OUTPUT
							1
			OUTPUT				INPUT
			Y/ VIDEO	Pb		Pr
		R AUDIO	L	(480i / 480p / 720p / 1080i)

TV

	Optional
HDMI cable	analog or
	digital audio
	connection

OPTICAL
INPUT		HDMI OUT	DIGITAL	R	L
COAXIAL	A/V receiver with
			AUDIO IN	ANALOG AUDIO IN
INPUT	HDMI output
	Any connection				VCR
	types
A/V receiver back panel	High-definition
	DVD player			DVD player
Note:
• On rare occasions, an HDMI signal may be		Cable box
copy-restricted and cannot be output from
the TV as a digital signal. To hear these copy-
protected signals through the A/V receiver, use
the connection for an analog A/V receiver.

•Check the A/V receiver’s Owner’s Guide for information concerning use of the digital input and switching between digital sound and analog stereo sound from the TV.

Downloaded From TV-Manual.com Manuals

For assistance call 1(800) 332-2119