Mitsumi electronic HC3200 user manual Installation menu

Menu operation (continued)

2. INSTALLATION menu

	opt.
INSTALLATION		AV MEMORY 1
	KEYSTONE	0
	LAMP MODE	STANDARD
	AUTO POWER	OFF
	ON
	AUTO POWER	OFF
	OFF
ON	SPLASH	ON
	SCREEN
	BACK COLOR	BLUE
	IMAGE	OFF
	REVERSE
	TRIGGER OUT	OFF
	TEST PATTERN	CROSS HATCH

2. INSTALLATION menu
ITEM	SETTING	FUNCTION
KEYSTONE	±15	Use to correct vertical keystone distortion.
LAMP MODE	STANDARD	Select this option when you want to view images in a well-lit room.
	LOW	Select to moderate the intensity of the lamp. The fan operating sound is
		reduced and the lamp lifetime becomes longer.
AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.

•The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is
		supplied.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on the
		ceiling.
TRIGGER OUT	SCREEN	The trigger output signal (12 V) is output from the TRIGGER terminal when
		the lamp illuminates.
	ANAMORPHIC	The trigger output signal (12 V) is output from the TRIGGER terminal when
		the aspect ratio is set to ANAMORPHIC 1 or ANAMORPHIC 2.
	OFF	The trigger output signal (12V) isn’t output.
TEST PATTERN	CROSS HATCH	Select to show the test cross hatch pattern.
	WHITE	Select to show the maximum brightness image.
	BLACK	Select to show the minimum brightness image.

•The STANDARD lamp mode is activated by default whenever the projector is turned on. When the LOW LAMP MODE has been chosen, the default STANDARD lamp mode is switched to the LOW lamp mode in 1 minute.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Do not change the setting of LAMP MODE frequently.

•To cancel the test pattern, press any button.

EN-27