Replacing the lamp (continued)

4.Insert the two cutout portions (h) in the slit of the projector, paste the two taping portions (g) with the tape included in the Lamp Replacement Attachment, and then fix the Lamp Replacement Attachment to the projector.

(g)

(g)

(h)

5.Pull out the lamp unit (f) in the bag by the handle

(e).

(f)

(e)

6.Remove the tape fixing the Lame Replacement Attachment, and remove the Lamp Replacement Attachment with the lamp unit remaining in the bag.

Caution:

•Pull the lamp unit out of the projector slowly. If it is pulled out quickly, the lamp may break, scattering glass fragments.

•Do not spill liquid on the removed lamp unit or do not place it near any flammable object or where children can reach to prevent injuries or fire.

7.Insert the new lamp unit, and secure it with two screws firmly.

8.Secure the lamp cover with screw (b) back again, and mount the cover (a).

Caution:

•Make sure that the lamp cover is secured firmly. Otherwise, the POWER indicator flashes red and green, disallowing the projector to be powered on.

Reset of the lamp operation time

Plug in the power cord, and reset the lamp operation time by keep pressing the t, u, and POWER buttons on the control panel at the same time.

Important:

•Unless these 3 buttons are held down at the same time, the lamp operation time isn’t reset.

•Make sure that the STATUS indicator blinks twice and the lamp operation time is reset successfully.

•The projector doesn’t turn on if the lamp cover isn’t attached securely.

•Be sure to reset the lamp operation time whenever you replace the lamp.

•Do not reset the lamp operation time unless you replace the lamp.

•The lamp is fragile. If it is broken, be careful not to cut yourself with glass fragments.

Caution:

•This projector uses a lamp that contains mercury. Disposal of the lamp or the projector with the lamp may

be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. (For the U.S. only.)

EN-38

Page 37 Page 39
Page 38
Image 38
Mitsumi electronic HC3200 user manual Reset of the lamp operation time
Page 37 Page 39

HC3200 specifications

The Mitsumi HC3200 is a state-of-the-art electronic component that has gained recognition for its advanced features and robust performance in various applications. Designed for enhanced functionality and adaptability, this component is ideal for a range of electronic devices, including computers, automotive systems, and consumer electronics.

One of the key features of the HC3200 is its high-speed processing capability. It utilizes a powerful microcontroller that operates at impressive clock speeds, allowing for efficient data handling and rapid execution of commands. This high-performance architecture ensures that devices powered by the HC3200 can handle complex tasks without lag, making it suitable for applications that require real-time processing.

In terms of connectivity, the HC3200 offers multiple interfaces, including USB, UART, and I2C, facilitating seamless integration into various electronic systems. This versatility allows engineers and designers to utilize the HC3200 in diverse projects, supporting both wired and wireless communications, which are essential in today’s interconnected world.

Another significant advantage of the HC3200 is its low power consumption. Designed with energy efficiency in mind, this component allows devices to operate longer on battery power, making it ideal for portable applications. The innovative power management features also contribute to reducing heat generation, thereby enhancing the reliability and longevity of the devices it powers.

The Mitsumi HC3200 is equipped with robust security features that protect against unauthorized access and data breaches. With integrated encryption capabilities, it ensures that sensitive information is safeguarded in applications where security is paramount, such as in financial transactions or personal data management.

Moreover, the HC3200 supports a wide temperature range, making it suitable for use in harsh environmental conditions. This characteristic is particularly important for automotive and industrial applications, where components often face extreme temperatures and challenging conditions.

The Mitsumi HC3200 is also engineered for easy programming and scalability, allowing developers to easily update firmware and expand functionality as needed. This adaptability is crucial for businesses looking to future-proof their products in a rapidly changing technological landscape.

In conclusion, the Mitsumi HC3200 is a versatile and reliable electronic component that combines high processing speeds, extensive connectivity options, energy efficiency, and robust security features. Its ability to thrive in various environments and applications makes it an excellent choice for developers aiming to create cutting-edge electronic solutions.
Top Page Image Contents