Mitsumi electronic MELSEC FX1S Foreword

FX1S Series Programmable Controllers

Foreword

• This manual contains text, diagrams and explanations which will guide the reader in the correct installation

and operation of the FX1S Series Programmable Controllers. It should be read and understood before

attempting to install or use the unit.

• Further information can be found in the FX Series Programming Manual II.

• If in doubt at any stage of the installation of an FX1S Series Programmable Controller always consult a

professional electrical engineer who is qualified and trained to the local and national standards which apply to

the installation site.

• If in doubt about the operation or use of FX1S Series Programmable Controller please consult the nearest

Mitsubishi Electric distributor.

• This manual is subject to change without notice.

Contents

Main FX1S Series Programmable Controllers Foreword FX1S Series Programmable Controllers Hardware Manual Guidelines for the Safety of the User and Protection of the FX1S. Page Page Marine standard Note Concerning the CE Marking EMC Models : MELSEC FX2NC series manufactured from October 1st, 2002 FX2NC-232ADP FX2NC-485ADP LVD Page Page Page Table of Contents Page Page Page Page Page 1-1 1. Introduction (2.96) Table 1.1:AC Power, Relay Output Units 0.30 (0.66) 0.40 (0.88) Table 1.3:DC Power, Relay Output Units +10%, -15% Table 1.4:DC Power, Transistor Output Units +10%, -15% 1-3 Figure 1.1: FX1S Outline Drawing Dimensions: mm (inches) W W-8(0.32") ES/UL,ESS/UL:75(2.96") DS,DSS :49(1.93") 82(3.23") 90(3.55") 2-4.5 (0.17") *1 The communication adapter needs to connect via an FX1N-CNV-BD to the FX1S Series PLC. Table 1.5: Expansion Board and Communication Adapter Page 1.2 World Specification Table 1.7: World / Japanese Specifications Page 1-8 1.4 Configuration Figure 1.2: Schematic System Page Table 1.9: Configuration Notes Table 1.10: Connection Ports Note Caution 1.5 Backup Data 2-1 2. Terminal Layouts -14MR-ES/UL -10MR-ES/UL -30MR-ES/UL -20MR-ES/UL 2.2 FX1S-**MR-DS Figure 2.2: Terminal Layouts, Relay Outputs, DC Power -30MR-DS -20MR-DS -10MR-DS 2.3 FX1S-**MT-DSS Figure 2.3: Terminal Layouts, Transistor Outputs, DC Power -30MT-DSS -20MT-DSS -10MT-DSS 2.4 FX1S-**MT-ESS/UL Figure 2.4: Terminal Layouts, Transistor Outputs, AC Power -20MT-ESS/UL -10MT-ESS/UL -30MT-ESS/UL Page 3-2 3.1 Product Outline -14MR Figure 3.1: Features of the FX1S PLC Table 3.1: Feature Table FX Page 3-4 3.3 General Specifications Table 3.3: General Specifications Page Page Page 3-8 3.5 DIN Rail Mounting = 4.5 mm (0.17") 3.6 Direct Mounting Table 3.4: Hole positions UNIT mm inches 0.2 0.01 A = W-8mm (0.32") FX1S-10M = 4.5 mm (0.17") Table 3.5: Hole positions 3.7 Termination of Screw Terminals Page Page Page Page Page Page Page 4.3 Power Supply 4.4 Power Supply Characteristics *1 Includes the input current (5 or 7mA per point). Table 4.1: AC Input Power Requirements, FX Page Page Page Page Page Page Page Page Page Page Page Page Bad Good Page Page Page Page Page 7.2 ERROR LED ON (CPU ERROR) Table 7.2: Error LED Checks 99 8 Page 7.5 Operation and Error Flags Table 7.3: Operation and Error Flags Page 7.7 Error Registers Table 7.5: Error Registers Page 7.9 Instruction List Table 7.7: Numerically Sorted Table 7.8: Alphabetically sorted Page Page Page Page Page Page Page Page Page Page HARDWARE MANUAL