Mitsumi electronic MELSEC FX1S Note Concerning the CE Marking

FX1S Series Programmable Controllers

Note Concerning the CE Marking

This note does not guarantee that an entire mechanical module produced in accordance with

the contents of this note will comply with the following standards. Compliance to EMC directive

and LVD directive of the entire mechanical module should be checked by the user /

manufacturer. For more details please contact the local Mitsubishi Electric sales site.

Programmable logic controllers are open-type devices that must be installed and used within

conductive control boxes.

Please use the FX1S Series programmable logic controllers while ins talled in conductive

shielded control boxes.

Please secure the control box lid to the control box (for conduction).

Installation within a control box greatly affects the safety of the system and aids in shielding

noise from the programmable logic controller.

Contents

Main FX1S Series Programmable Controllers Foreword FX1S Series Programmable Controllers Hardware Manual Guidelines for the Safety of the User and Protection of the FX1S. Page Page Marine standard Note Concerning the CE Marking EMC Models : MELSEC FX2NC series manufactured from October 1st, 2002 FX2NC-232ADP FX2NC-485ADP LVD Page Page Page Table of Contents Page Page Page Page Page 1-1 1. Introduction (2.96) Table 1.1:AC Power, Relay Output Units 0.30 (0.66) 0.40 (0.88) Table 1.3:DC Power, Relay Output Units +10%, -15% Table 1.4:DC Power, Transistor Output Units +10%, -15% 1-3 Figure 1.1: FX1S Outline Drawing Dimensions: mm (inches) W W-8(0.32") ES/UL,ESS/UL:75(2.96") DS,DSS :49(1.93") 82(3.23") 90(3.55") 2-4.5 (0.17") *1 The communication adapter needs to connect via an FX1N-CNV-BD to the FX1S Series PLC. Table 1.5: Expansion Board and Communication Adapter Page 1.2 World Specification Table 1.7: World / Japanese Specifications Page 1-8 1.4 Configuration Figure 1.2: Schematic System Page Table 1.9: Configuration Notes Table 1.10: Connection Ports Note Caution 1.5 Backup Data 2-1 2. Terminal Layouts -14MR-ES/UL -10MR-ES/UL -30MR-ES/UL -20MR-ES/UL 2.2 FX1S-**MR-DS Figure 2.2: Terminal Layouts, Relay Outputs, DC Power -30MR-DS -20MR-DS -10MR-DS 2.3 FX1S-**MT-DSS Figure 2.3: Terminal Layouts, Transistor Outputs, DC Power -30MT-DSS -20MT-DSS -10MT-DSS 2.4 FX1S-**MT-ESS/UL Figure 2.4: Terminal Layouts, Transistor Outputs, AC Power -20MT-ESS/UL -10MT-ESS/UL -30MT-ESS/UL Page 3-2 3.1 Product Outline -14MR Figure 3.1: Features of the FX1S PLC Table 3.1: Feature Table FX Page 3-4 3.3 General Specifications Table 3.3: General Specifications Page Page Page 3-8 3.5 DIN Rail Mounting = 4.5 mm (0.17") 3.6 Direct Mounting Table 3.4: Hole positions UNIT mm inches 0.2 0.01 A = W-8mm (0.32") FX1S-10M = 4.5 mm (0.17") Table 3.5: Hole positions 3.7 Termination of Screw Terminals Page Page Page Page Page Page Page 4.3 Power Supply 4.4 Power Supply Characteristics *1 Includes the input current (5 or 7mA per point). Table 4.1: AC Input Power Requirements, FX Page Page Page Page Page Page Page Page Page Page Page Page Bad Good Page Page Page Page Page 7.2 ERROR LED ON (CPU ERROR) Table 7.2: Error LED Checks 99 8 Page 7.5 Operation and Error Flags Table 7.3: Operation and Error Flags Page 7.7 Error Registers Table 7.5: Error Registers Page 7.9 Instruction List Table 7.7: Numerically Sorted Table 7.8: Alphabetically sorted Page Page Page Page Page Page Page Page Page Page HARDWARE MANUAL