Mobi Technologies 70204, DXR manual Installation & Setup, Camera Start-Up, Monitor Start-Up

INSTALLATION & SETUP

Camera Start-Up

1.Connect power cable to Camera’s DC IN jack, then plug its power supply adapter into wall outlet.

2.Slide [Power Button] once to turn ON the camera.

NOTE: Use only the 5V/1A power adaptor provided in the package. To operate without power cable visit www.getmobi.com to purchase the optional recharge- able battery.

Monitor Start-Up

1.Connect power cable to Monitor’s DC IN jack, then plug its power supply adapter into wall outlet.

2.Press [Power Button] to turn ON the monitor.

NOTE: Built-in Lithium battery charging process starts automatically by plugging in the power supply. Please charge the battery before operating the monitor for por- table use. Battery indicator will flash red three minutes before charging is needed.

When [Battery Indicator] lights up red, plug in power adapter to charge battery.

NOTE: Use only the 5V/1A power adaptor provided in the package.

8