Mobility Electronics NP644 manual Tx Rate

	Field Description
	● Ad-Hoc– to establish peer-to-peer wireless communication
	directly with other wireless client devices such as other
	computers with wireless cards.
Ad-Hoc Band:	There are three bands available for selection- 11B, 11G and 11G
	Turbo. Choice depends on the type of wireless equipment you
	wish to connect to. Check the documentation of the associated
	equipment to verify details.
Channel:	The channel value that the PCI card will operate in. Australian
	Users should select the Channel Range 1-13 and all stations
	on the WLAN need to be on the same channel if they are to
	communicate.
Tx Rate:	Select the data rate for data transmission.
Power Mode:	There are 3 modes to choose from:
	● Continuous Access Mode (default) – the USB Adaptor is
	constantly operating with full power and it consumes the most
	power.
	● Maximum Power Save – theUSB Adaptor consumes the
	least power and only operates when there is wireless network
	activity.
	● Power Save – the USB Adaptor consumes a moderate level of
	power.

NP644 IEEE 802.11g Wireless Network USB Adaptor	19
YML787 Rev1