Mobility Electronics NP644 manual Advanced

Advanced

In the Advanced page you can configure advanced settings of your 108Mbps Wireless Network USB Adaptor

FieldDescription

Encryption: There are four options available: Disable (WEP), Enable (WEP), WPA and WPA-PSK. The default setting is set to “Disable”. Enable and Disable refer to WEP data encryption feature. If Enable is selected, you will be required to select the Authentication mode from the drop down list. If WPA is selected, configuration is enabled. Select the “configuration” button.

You will then be prompted with the following pop up window.

NP644 IEEE 802.11g Wireless Network USB Adaptor	21
YML787 Rev1