Introduction
About the iGo USB Host Modem Adapter
The iGo USB Host Modem Adapter enables a telephone connection to a host computer from many palmOne handheld devices as well as the Symbol
Minimum Requirements
The following minimum requirements must be met for the network, handheld, and desktop computer:
•palmOne m125/130/500/505/515, i705, Tungsten T/T2/T3/C/W, Zire 71/72 or Symbol
•Analog phone line service
•The AC power adapter for iGo USB Host Modem Adapter
•iGo USB Host Modem Adapter
•A desktop computer with a V.92 compatible modem (V.90 maximum for PS6U1M) and HotSync Manager® configured to synchronize via the modem connection.
Unpacking the Product
The USB Modem Adapter box contains the following items:
•USB Modem Adapter
The USB Modem Adapter is designed for specific Palm handheld devices. There are four connections associated with the USB Modem Adapter:
•USB connector
• Two RJ11 phone jacks (interchangeable) One jack is provided to bring the phone connection from the wall (or telephone company) line into the device. The other is provided to pass the signal through the device to a phone or other device that shares the line. Please note that only one device may use the line at a time.
• Power jack which is compatible with the included AC power adapter.
•Power adapter
The AC power adapter provided with the unit is designed specifically for the USB Modem Adapter. It uses standard household outlet voltage (120VAC) and coverts it to the voltage needed to power the cradle. This adapter is not intended for use with any other device than the USB Modem Adapter. Using a power adapter other than the one provided to power the USB Modem Adapter may damage the unit and will void the warranty.
4