TAURUS INSTRUCTIONS
FOR LASER-CUT CABIN AND
PILOT HOUSE
The TAURUS kit has been modified to include
These instructions apply to assembly of the
MAIN CABIN
Step. 1 - Glue the 1/8" cabin lifts together.
Step. 2 - Shape the top and bottom of the cabin lifts to follow the deck sheer line. The front also needs to be sloped back a bit. This can be done with a sanding block. See Figure 1.
Step. 3 - Glue on the 1/32" cabin top. The cabin top is slightly smaller than the plan to allow for adding the edge molding (see Instruc- tion Manual).
Step. 4 - Return to the Instruction Manual for instructions on installing the windows, doors, and siding.
PILOT HOUSE
Step. 1 - Glue up the three 1/8" lifts with curved front. On top of these glue on two of the 1/32"
Cabin lifts 1/8” thick 8 required
1/8” thick 3 required
Pilot house
lifts 1/8” thick
3 required
Cabin top 1/32” thick 1 required
Pilot house top
1/32” thick
1required
1/32” top
lifts supplied in the kit. Glue the three 1/8" rect- angular lifts on the aft side. Next, add two more
1/8”
2@1/32”
1/32" lifts. You now have a pilot house with a
1/8”
2@1/32”
Step. 2 - Glue on the 1/32" thick pilot house top. See Figure 2.
Pilot house lifts at
windows 1/32” thick 4 required
FIGURE 2
Step. 3 - Return to the Instruction Manual for instructions on installing the windows, doors, and siding.
FIGURE 1 | Shape profile |
14