Technical data sheet for
GAS GRIDDLE 1200mm
GP518-B, GP518-CB, GP518-LS, GP518-RB
Ribbed plate options
Mirror chromed plate options Top weld sealed plates
108MJ thermostatic burner system Separate left, centre, and right heat zones 3 models of base unit
1 model of ventilated refrigeration base with drawer/door options
Rear rollers
Stainless steel exterior Easy clean
Easy service Fully modular
Overall Construction
Griddle
•20mm thick machined top plates standard
•Optional ribbed plate sections
•Optional mirror finish hard chrome plates
•2.5mm thick 304 stainless steel splash guards sides and rear
•2.0mm thick grease channel
•Three 36MJ 3 bar even heat burners with three thermostatic controls
•Full pilot and flame failure protection with piezo ignition
•Welded hob surround with 1.5mm 304 stainless steel bull nose
•Side panels 1.2mm 304 stainless steel
•Splashback 1.2mm 304 stainless steel
•Vitreous enamelled control panel
•Stainless steel grease drawer
•Overlapping finish at front and rear of plate for easy clean
Bench mount (supplied as
•Four 63mm dia.
•Adjustable height 80mm – 105mm
Cabinet base (supplied as
•Fully modular for match suite finish
•Double skin 0.9mm 304 stainless steel interior and exterior
•Optional GN 1/1 4 position racking kit (1 or 2 cabinet bays)
•Up to eight 65mm GN 1/1 capacity
•63mm dia.
Leg stand (supplied as
•Fully modular for matched suite finish
•Framed top for connection to Griddle
•63mm dia.
•Fully modular framed stand shelf with 0.9mm 304 stainless steel finish
•Suitable for rear or through shelf gas connection to Griddle
•Quick assembly design
GP518-LS
Refrigerated base (supplied as
•Self contained suite matched modular base
•Ventilated system with R134a refrigerant
•
•Two GN 1/1 drawers
•100mm deep pan capacity
•
•Magnetic drawer gaskets (replaceable without tools)
•50mm fully foamed CFC free insulation
•304 stainless steel exterior and interior
•
•No condensate drain required
•63mm dia.
•Condensing unit removable through front of unit for service
•Easy clean interior
Controls
Griddle
•Separate left, centre, and right side heat zones
•Three
•Large easy use control knobs - heat resistant reinforced
•Easy view control settings on knobs
•Flame failure pilot burners
•Piezo ignition to each pilot burner
•
Refrigerated Base
•Digital control electronic thermostat
•Automatic defrost
•Automatic evaporation of defrost water
•
Cleaning and Servicing
•All models with easy clean stainless steel external finish
•Plate is finished front and rear with overlap construction to remove cleaning traps
•Control service and gas conversion through front of unit
•Burner service requires plate removal
•Refrigerated Base condenser removable through front of unit