![Assembling Your Floor Sanitizer](/images/new-backgrounds/200561/20056115x1.webp)
Assembling Your Floor Sanitizer
1
2
3 Ready to Clean
To enable you to get the most satisfaction from your Pet Plus™ Floor Sanitizer, be sure to follow the assembly and operating instructions included in this manual. Read this manual thoroughly before assembling your unit.
After unpacking the Pet Plus™, identify the product parts before assembling. Pay specific attention to the product descriptions to familiarize yourself with all the parts of your Pet Plus™ Floor Sanitizer. No additional tools are needed to put the unit together. It is quick and easy.
1 Insert the Easy Grip Handle onto the top end of the silver upper ergonomic pole.
Important NOTE: The upper pole has one end that is indented and narrow. The narrow end fits into the Pole Connection, NOT the handle. See Fig under Step 2.
Align the indent in the pole to the ridge inside the handle and the Locking Pin to the hole in the handle. Hold the Locking Pin in, and slide them together until the pin snaps into place.
Upper
Ergonomic
Pole
Easy Grip |
| Pole |
| Connection | |
Handle |
| |
|
|
Pole Base
Unit Head
Lower
Ergonomic
Pole
2 Attach the upper pole once the handle has been secured in place, to the lower pole at the plastic connection. The narrow end of the upper pole connects into the plastic Pole Connection. Align the ridge to the front and the Locking Pin to the hole in the plastic Pole Connection, and while holding the Locking Pin in, slide the poles together until the pin snaps into place.
Wider End of Upper Pole fits into handle
Ridge towards the front
Indented Narrow End - Note the indented end that fits into the Pole Connection.
Ridge |
|
towards |
|
the front | Locking |
| Pin in |
Locking | place |
Pin in |
|
place |
|
pg 6 | 877 - HAAN DIRECT / 877 - 422 - 6347 | www. H A A N USA . com |