Moffat MEH 631 manual Important safety requirements, Location

Important safety requirements

This hob must be installed in accordance with the IEE Wiring Regulations (Current Edition). Detailed recommendations are contained in the following British Standards Codes Of Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.

Location

This hob has been registered as a "Class X" appliance according to Fire Risk Regulations.

Minimum distances detailed below must be observed. The hob may be located in a kitchen, a kitchen/diner or bed sitting room, but not in a bathroom or shower room.

Before making the cut out in the worktop ensure that there is a minimum distance of 55

mm.between the rear edge of the hob and the wall. A minimum distance of 100 mm. must be left between the side edges of the hob and any adjacent cabinets or walls.

The minimum distance combustible material can be fitted above the hob in line with the edges of the hob is 400 mm. If it is fitted below 400 mm. a space of 50 mm. must be allowed from the edges of the hob.

The minimum distance combustible material can be fitted directly above the hob is 700 mm.

INSTALLATIONGUIDANCEINSTRUCTIONS

CLEARANCES REQUIRED

WHEN FITTING THE HOB

WITHOUT A COOKER HOOD ABOVE

650mm

FO 0812

INSTALLATIONGUIDANCEINSTRUCTIONS
	CLEARANCES REQUIRED
		WHEN FITTING THE HOB
	WITH A COOKER HOOD ABOVE
		600 mm
650 mm
	400 mm
		mm
	50	55
		mm		400 mm
100	mm
		50	mm
FO 0813

7