Moffat MSF 611 manual Cleaning the Oven Door, Models in stainless steel or aluminium

Cleaning the Oven Door

Before cleaning the oven door, we recommend you to remove it from the oven.

Proceed as follows:

1.open the oven door completely;

2.find the hinges linking the door to the oven (Fig. A);

3.unlock and turn the small levers located on the two hinges (Fig. B);

4.handle the door by its left- and right-hand sides, then slowly turn it towards the oven until it is half- closed (Fig. C);

5.gently pull the oven door off its site (Fig. C);

6.place it on a steady plan;

Clean the oven door glass with warm soapy water and a softh cloth only. Never use harsh abrasives. Once the cleaning is carried out, refit theovendoor,followingtheprocedureinreverse.

Models in stainless steel or aluminium:

We recommend to clean the oven door using only a wet sponge and dry it up after cleaning with a soft cloth. Never use steel wool, acids or abrasive products as they can damage the oven surface. Clean the oven control panel following the same precautions.

DO NOT clean the oven door while the glass panels are warm. If this precaution

is not observed the glass panel may shatter.

If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Contact your local Service Centre who will be pleased to advise further.

Fig. A	Fig. B	Fig. C
12