Chapter 2 | Connection and Setup |
|
|
Network Configurations
The following are examples of network configurations. These samples show configurations using ana- log inputs and outputs. Momentum digital input and outputs or DSP devices use the same methods for network configuration.
Using the Momentum system, the network configuration possibilities are endless. For more information on advanced configurations and support, visit www.procomomentum.com. For further support, con- tact you local dealer or Pro Co technical support.
One to One Connection
Chn 001 must be present on the network at all
!times. This unit will sync the network clock.
| mi8 Input |
Direct Copper Connection | Direct Fiber Connection |
275 Meters using 62.5/125um MMF 200Mhz | |
CAT5E or CAT6 | 550 Meters using 50/125um MMF 500Mhz |
No crossover required |
|
100 Meters | Cross Fiber Rx/Tx |
mo8 Output
Optionally, Fiber and Copper may both be connected for redundancy.
Momentum mo8 Manual | 11 |