8.0 | BATTERY AND POWER SUPPLY SPECIFICS | 10 | |
| 8.1 | Displaying Battery Charge Percentage | 10 |
| 8.2 | Low Battery Indication | 10 |
| 8.3 | Charging the Batteries | 10 |
| 8.4 | External Power Supply/Charger | 10 |
| 8.5 | Battery Disposal | 11 |
9.0 | SPECIFICATIONS | 12 | |
10.0 OPTIONS AND ACCESSORIES | 13 | ||
10.0 OPTIONS AND ACCESSORIES
Set of mating 1/8 inch (3.5mm) male phone plugs for external input / output | |
6 foot (1.8M) input / output cable, 1/8 inch (3.5mm) male phone plug to male | |
| BNC connector |
| 6 foot (1.8M) input / output cable, 1/8 inch (3.5mm) male phone plug to 1/8 |
| inch (3.5mm) male phone plug for daisy chaining strobes together |
Latching carrying case for Strobe with provision for accessories | |
| AC Power Supply/Charger, 115 VAC - 50/60 Hz; Allows continuous operation |
| from AC mains or charges batteries |
| Same as above except 230 Vac - 50/60 Hz |
Standard recharger, 115 Vac - 50/60 Hz (14 hour) | |
Same as above except 230 Vac - 50/60 Hz | |
Digital Stroboscope replacement lamp | |
Splash proof Protective Cover for battery model Stroboscopes | |
| Remote Optical Sensor with 8 foot (2.5 m) cable for triggering strobe |
Reflective tape. 5 foot (1.5 m) roll, 0.5 inch wide | |
Magnetic Sensor/Amplifier with 8 foot (2.5 m) cable for triggering strobe | |
| Infrared Sensor for use without reflective target at 0.5 inch (12 mm) gap with 8 |
| foot (2.5 m) cable for triggering strobe |
Remote Laser Sensor with 8 foot (2.5 m) cable for triggering strobe |
13
