Monessen Hearth CWC400 Chimney Components cont, CWC Series Woodburning Fireplace, Description

CWC Series Woodburning Fireplace

(Chimney Components con't.)

Component	Description	Model Number
Square Chase Termination	Square chimney cap used to terminate chimney	SLTS8
	through chase. Includes adapter.
	(Flashing material)
Adapter Kit	Required to unite 3-wall chimney with S20BR,	S20UB
	S20BT, S20BW Traditional Top Housing
Chimney Support	Used to support the chimney at each 30' of	TCS8A
	of vertical height above the hearth and
	at every 6' of inclined chimney run.
	Each support adds 2¹⁄₂" to chimney length.
Firestop	Required at each floor level and attic on	FS2A (8" straight flue)
	multi-story installation.	FS6A (8" 30° inclined
		flue)
Radiant Shield	Used as an alternate to FS2A firestop to	RS-8A
	reduce the clearance from the chimney to
	combustible framing. With 16" center lines.
Attic Insulation Shield	Used to prevent attic insulation from	FS2100-HT
(3-wall) (CF-11)	contacting the chimney system.
Canada
Chimney Collar Enclosure	Installs on the "over the chimney collar" of the	CCE-SK
(SK8)	fireplace; provides outside air to assist in cooling
	the chimney system.
Attic Insulation Shield	Used to prevent insulation from coming in	AIS-SK
(SK8)	contact with the chimney system.
SK8 Chimney Sections	Used to build chimney systems exposed above	SK818CAN (1¹⁄₂' Long)
	roof.	SK84CAN (4' Long)
45˚ Chimney Elbows	Provides 45° offset and return. For Canadian	SK845/2
	installations only. For use with SK8 chimney only.
	(Maximum use of 2, or 1 pair.)
Chimney Sections	Used to build chimney systems exposed above	8" flue
(3-wall)	roof.	818CAN (1¹⁄₂' Long)
		84CAN (4' Long)
Attic Insulation Shield	Used to prevent attic insulation from	FS2100-HT
(3-wall) (CF-11)	contacting the chimney system.

87D1504 21