OPERATING INSTRUCTIONS

MANUAL CONTROL LIGHTING INSTRUCTIONS

1.STOP! Read the safety information.

2.Make sure the manual shutoff valve is fully open.

3.This heater is equipped with an ignition device (piezo) which automatically lights the pilot.

4.Refer to Figure 28, page 26 for the location of the piezo ignitor and control knob. Push in gas control knob slightly and turn control knob clockwise to the OFF position.

NOTE: Knob cannot be turned to OFF unless knob is pushed in slightly. Do not force.

5.Wait 5 minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas STOP! Follow the instructions under “WHAT TO DO IF YOU SMELL GAS”, page 26. If you do not smell gas, go to the next step.

6.From OFF position, push in gas control knob slightly and turn counterclockwise to the IGN position. See Figure 30. Push in and hold control knob for 5 seconds.

NOTE: If you are running the heater for the first time, it will be necessary to press in the control knob for 30 seconds to allow air to bleed out of the gas piping.

7.With the control knob pushed in, push and release the piezo ignitor button to light the ODS pilot. The pilot is located on the right side of the heater, behind the front log and in front of the main burner. If piezo ignitor does not light the pilot, refer to “MATCH LIGHTING INSTRUCTIONS”, page 30.

8.Hold the control knob in for an additional 10 seconds to prevent the ODS pilot from shutting off the gas while the thermocouple is warming up.

9.Release the control knob.

•If the knob does not pop out when released, stop and immediately call your service technician or gas supplier.

•If the ODS pilot will not stay lit after several tries, push and turn the gas control knob clockwise to OFF and wait 15 seconds. Repeat steps 6 through 9.

10.Push in control knob and turn to desired setting (LOW or HIGH). The control knob must be set at either the low or high position, and the control knob will pop out when positioned correctly. Do not set the control knob at a position between LOW and HIGH. Refer to Figures 31 and 32.

Rotate

 

 

 

Rotate

 

 

 

Rotate

Push

Push

Push

Figure 30 - IGN Position

Figure 31 - HIGH Position

Figure 32 - LOW Position

Wait 30 seconds before readjusting the heater when the control knob has been turned down to a lower setting.

TO TURN OFF GAS TO HEATER

1.Turn control knob clockwise to OFF position to completely shut off the heater.

2.If applicable: Turn off all electric power to the heater.

14D2099

27

Page 26 Page 28
Page 27
Image 27
Monessen Hearth GLX18, GLX28, GLX24, DLX18, DLX28 Manual Control Lighting Instructions, To Turn OFF GAS to Heater
Page 26 Page 28

DLX18, GLX28, GLX18, GLX24, DLX28 specifications

Monessen Hearth is renowned for its innovative and aesthetically pleasing gas fireplaces, and models like the DLX28, GLX24, GLX18, GLX28, and DLX18 embody this excellence. These fireplaces are designed to elevate the ambiance of any space while providing reliable heating and energy efficiency.

The DLX series, including the DLX28 and DLX18, showcases a blend of traditional craftsmanship with modern performance. These models focus on user-friendly features, such as an easy-to-use remote control and touchscreen controls that allow homeowners to adjust settings with ease. The realistic flame presentation, enhanced by the vibrant, hand-painted log sets, offers a lifelike fire experience. The DLX series also prioritizes efficiency, with high AFUE ratings ensuring minimal energy waste.

In contrast, the GLX series, featuring the GLX24 and GLX28, is perfect for those looking to create a contemporary living space. These fireplaces provide a sleek aesthetic with clean lines and minimalistic designs, making them an ideal fit for modern interiors. The GLX models incorporate advanced technologies such as a glass ember bed and multiple flame height adjustments, providing a customizable ambiance tailored to any moment. Additionally, they offer the option of a direct vent installation, ensuring optimal ventilation while maintaining efficiency.

The GLX18 complements smaller spaces without sacrificing style or performance, making it ideal for compact homes or apartments. Like its larger counterparts, it utilizes advanced safety features, including a built-in oxygen depletion sensor for added peace of mind.

All Monessen Hearth fireplaces are equipped with robust safety systems, ensuring optimal performance and security for homeowners. These models are also designed for versatility, allowing them to be installed in various settings, from traditional brick fireplaces to contemporary wall-mounted configurations.

In summary, the Monessen Hearth DLX28, GLX24, GLX18, GLX28, and DLX18 fireplaces represent the pinnacle of comfort and technology, offering stylish designs, user-friendly features, and energy-efficient performance. Whether you prefer a classic or modern aesthetic, Monessen Hearth has a model to fit your unique style and heating needs, making them an excellent choice for any home.
Top Page Image Contents