LOG PLACEMENT
INSTALLING SPLIT MAPLE LOGS ON GRATE
1.Install back log (#1) on two pins (2) located near the back of base. Check log position and stability. See Figure 30.
2.Install right bottom log (#2) on two (2) pins located on right side of base. See Figure 31.
3.Install left bottom log (#3) on pin located on right side of base. See Figure 32.
4.Lay back end of center top log (#4) on the center of back log. Position front end of center top log (#6) on protrusion of bottom left log. See Figure 33.
Right Bottom
Rear Log
(#1)
Log (#2)
PinsPins
Figure 30 - Installing Back Log (#1) | Figure 31 - Installing Right Bottom Log (#2) |
Pin
Top Center
Left BottomLog (#4)
Log (#3)
Protrusion
Figure 32 - Installing Left Bottom Log (#3) | Figure 33 - Installing Center Top Log (#4) |
28 | 59D1015 |